용접절차인정시험기록(PQR) (무료다운로드)

	용접절차인정시험기록
	Procedure QUALIFICATION RECORD (PQR)
	PQR No.	PQR-GMAW-002							작성일자	2009-06-08
	WPS No.	SC-GMAW-001			작성(개정)일자		2009-04-02		개정번호		0
	용접방법(Welding Process)						용접형태(Welding Type)
	1.이음(JOINT)
	사용된 홈형태(Groove Design Used)
	2.모재(BASE METAL)					6.용접자세(Position)
	재질(Material Spec)					Position of Groove
	형태 및 등급(Type & Grade)					진행방향(Weld Progression)
	두께(Thickness)					기타(Others)
	직경(diameter)
	기타(Others)					7.가스(GAS)
						가스사용				단일
	3.용가재(FILLER METAL)					가스조성비(Percent Composition)
	용접금속분류(A-No.)						사용목적	가스종류	혼합비	유량(ℓ/min)
	용접봉규격(Size of Electrode)
	F-No.
	SFA Spec
	AWS No.(Class)					8.전기적특성(ELEC. CHARACTERISTICS)
	용착금속(Deposited Weld metal)					전류형태(Current Type)				교류(AC)
	기타(Others)					극성(Polarity)				고주파교류(ACHF)
							Pass	Process	Amperes	Volts	Speed
	4.예열(PREHEAT)
	예열온도(Preheat)
	층간온도(Interpass)
	기타(Others)					9.용접기법(TECHNIQUE)
						주행속도(Travel Speed)
	5.후열처리(POSTED HEAT TREATMENT)					Straight or Wave Bead
	후열온도(Temp)					위빙폭(Oscillation)
	후열유지시간(Holding Time)					Multi or Single Pass
	기타(Others)					기타(Others)
	10.인장시험(TENSILE TEST)
	시편번호	Dimension		단면적		Ultimate Total		Ultimate Unit		파단위치
	Specimen No	Width	Thickness	Area(㎟)		Load(kg)		Stress(kg㎟)		Failure Location
	11.굽힘시험(GUIDED BEND TESTS)
	형태 및 도번(Type & Figure No)			결과(Result)			형태 및 도번(Type & Figure No)			결과(Result)
	12.충격(인성)시험
	Specimen	DWT	Break	No Break	Specimen	Notch	Notch	Test	Impact	Lateral Exp
	No.	Temp			No	Location	Type	Temp	Value	Shear	Mils
	13.RT TEST (NDE)
	Specimen No	결함종류(Kind of Indication)			판정		Specimen No	결함종류(Kind of Indication)			판정
	14.필렛용접시험(FILLET WELD TEST)
	No.	Result of Satisfaction		Penetration into Parent Metal			No.	Result of Satisfaction		Penetration-P. Metal
	15.기타시험(OTHER TEST)
	융착분석(Deposit Analysis)
	시험형태(Type of Test)
	Macro Result
	Welder Name						Clock No.
	Test Conducted by						Stamp ID No.
							Laboratory No.

 

 

 

====================================
다운로드는
www.iso9000.com.ne.kr을 참조하세요
====================================